LED Lenser i6ER Rechargeable LED Torch

PriceMatch
Seen it for less? click here

View more products from LED Lenser

The LED Lenser i6ER rechargeable penlight is a variation on the i6R, offering a reduced output of 60 lumens in order to be run-time optimised with 8 hours run-time on high. Made from robust aluminium, it also features the industrial series' signature yellow ring on the inside of the head and yellow detailing on the switch, which is great for visibility in a work place environment. Featuring the Advanced Focus System (AFS), the patented combination of a reflector and lens allows the i6ER to create a light system that provides both a focused beam for long-distance and a homogenous spill-beam for up-close activities. You can quickly focus between spot and flood by sliding the head of the torch backwards and forwards. Simple to operate, it has a push button switch on the tail that cycles through the two brightness settings of high and low, with half presses of the switch. Alternatively, one press turns the light on in high and the next press turns it off. A third press turns the torch on in low and the next press turns it off. It uses three rechargeable AAA NiMH batteries, with superior gold-plated battery contacts to help resist corrosion and keep the battery running well. A full charge can provide a run-time of up to 25 hours on the low setting and the energy saving function gradually decreases the output down to 1 lumen, in order to prolong the output of the torch. The batteries are charged inside the torch using the LED Lenser charging station. The tail of the torch sits in the charger and the included cable plugs into the micro USB port on the charging base at one end, and the other end plugs into a USB port on the computer/laptop or a suitable mains/car USB adaptor. A light around the bottom of the charging station displays charging status. The light is blue when in standby mode, turning red once the torch is inserted to show charging is in progress and when charging is complete the light will go green. If there is an error, the light will flash blue to indicate this. A sticky pad is included so that you can secure your charging station in one location if you wish and there are also holes on the back so that it can be wall mounted (fixtures not included). The long barrel design is perfect for illuminating narrow or confined spaces in a factory, workshop or garage and the included pocket clip and holster provide easy stowing when the torch is not in use. Operational Modes High: 60 lumens; 8 hours run-time; 80 m beam range Low: 10 lumens; 25 hours run-time; 30 m beam range Technical Details Type: Professional hand-held torch Luminous Flux: Up to 60 lumens Beam Range: Up to 80 m Run Time: Up to 25 hours (down to 1 lumen on low setting) LED: High power Cree LED Focus: Spot to flood Batteries Required: 3 x AAA NiMH (included) Overall Length: 170 mm Body Diameter: 19 mm Weight: 82 grams Body Colour: Black Body Material: Robust aluminium housing Electrical Contacts: Gold plated contacts Switch Type: End cap switch Environmental: Water resistant to IPX4 standards Warranty: 5 years Regulatory Compliance: CE / RoHS Packaging and Contents Supplied in retail packaging and includes: LED Lenser i6ER LED torch x 1 Pocket clip x 1 Nylon holster x 1 900 mAh AAA NiMH battery x 3 Charging station x 1 Micro USB cable x 1 Adhesive pad x 1 Manual x 1